Back to top

Image: Bigstock

US Steel Output Notches Weekly Rise as Utilization Tops 65%

Read MoreHide Full Article

U.S. raw steel production continues to rise on a weekly basis on an improvement in capacity utilization. According to the latest American Iron and Steel Institute ("AISI") weekly report, domestic raw steel production clocked 1,459,000 net tons for the week ending Sep 12, marking a 2.2% increase from production of 1,428,000 net tons for the week ending Sep 5. This follows a 3.3% rise on a weekly comparison basis for the week ending Sep 5.

However, the reported weekly production was still down 19% from production of 1,801,000 net tons registered for the same period a year ago.

Weekly Capacity Utilization Improves

Capacity utilization — a key metric in the steel industry — was 65.1% for the reported week, rising from the previous week’s reading of 63.7%, indicating an improvement in activity. However, it was still well below the key 80% threshold — the minimum rate required for sustained profitability of the industry. Capability utilization rate for the reported week was down from 77.4% a year ago, per the AISI.

Notably, after remaining above the 80% the level in early 2020, capacity utilization rate slumped to 51.1% in May — the lowest level in many years as the coronavirus pandemic decimated steel demand across major end-use markets.

U.S. steel capacity utilization started to decline in 2008 during the global financial crisis after remaining above 80% for a number of years. Utilization nosedived to almost 50% in 2009 before trending upward on recovery in the U.S. economy from the financial crisis.

Notably, the 25% tariff on steel imports, which the Trump administration had levied under Section 232 of the Trade Expansion Act of 1962, largely helped the U.S. steel industry capacity break above 80% in 2018. U.S. steel mills operated near or above that level for most part of 2019.

Meanwhile, by-region, output from Great Lakes rose roughly 5% on a weekly basis to 530,000 net tons in the reported week. Mills in the North East produced 122,000 net tons of raw steel, down around 12% from the previous week. Production in the Southern region notched up a roughly 1% gain to 565,000 net tons in the reported week. The Midwest region produced 172,000 net tons of raw steel, up around 10% from a week ago. Output went down roughly 3% in the Western region to 70,000 net tons.

Overall year-to-date production still trails that of a year ago. Adjusted year-to-date production through Sep 12 was 54,728,000 net tons at a capability utilization rate of 65.9%, down 20.1% from 68,531,000 net tons recorded in the same period a year ago, the AISI noted. Capability utilization rate for the period is also considerably down from 80.3% recorded last year.

U.S. Steel Industry Prospects Brighten on Demand Revival

Coronavirus has taken a big bite out of the U.S. steel industry this year. The pandemic led to a sharp drop in demand for steel across major end-use markets such as construction and automotive during the first half of 2020.

The demand slowdown also forced U.S. steel mills to curtail production with capacity utilization dropping to a multi-year lows during the first half. U.S. steel prices have also come under pressure this year amid pandemic-induced demand shocks.

The benchmark hot-rolled coil (“HRC”) prices tumbled to below the $500 per short ton level in April on concerns over the fast-growing pandemic in the United States and demand slowdown amid production shutdowns by automakers. However, driven by U.S. steel mills’ price hike actions, HRC prices gained some traction during the second quarter breaking above that level. However, prices again came under pressure in the past two months on demand weakness.

Nevertheless, a recovery in end-market conditions of late from the virus-led slowdown bodes well for the U.S. steel industry. U.S. automakers began resuming production in May after a nearly two-month shutdown due to the virus crisis. Automakers are ramping up production to normal levels. The rebound in the domestic automotive industry represents a tailwind for the U.S. steel industry. Moreover, the resumption of many projects that were stalled earlier due to supply chain disruptions and labor shortage is expected to support the recovery in the U.S. construction sector. U.S. steel prices have also gained ground this month climbing past $500 per short ton on a recovery in end-market demand, especially in automotive, amid tight supply.

Notably, United States Steel Corporation (X - Free Report) , in its second-quarter call, said that automotive original equipment manufacturers are approaching normal production levels and healthy order activity has continued into the third quarter. The company also expects construction demand to remain strong, especially for value-add construction products.

Steel Dynamics, Inc. (STLD - Free Report) also stated that it seeing a rise in steel demand as automotive sector and its related supply chain have restarted production. The company envision steel demand to improve in the second half. Moreover, Nucor Corporation (NUE - Free Report) expects to benefit from strength in the non-residential construction market in the third quarter.

Steel Stocks Worth Considering

A couple of stocks currently worth a look in the steel space are TimkenSteel Corporation (TMST - Free Report) and Olympic Steel, Inc. (ZEUS - Free Report) , both carrying a Zacks Rank #2 (Buy). You can see the complete list of today’s Zacks #1 Rank (Strong Buy) stocks here.

TimkenSteel has expected earnings growth of 28% for the current year. The Zacks Consensus Estimate for the current year has been revised 45.4% upward over the last 60 days. The company also delivered an earnings surprise of 28.3%, on average, over the trailing four quarters.

Olympic Steel delivered an earnings surprise of 34.5% in the last reported quarter. The Zacks Consensus Estimate for the current year has been revised 37.1% upward over the last 60 days.

More Stock News: This Is Bigger than the iPhone!

It could become the mother of all technological revolutions. Apple sold a mere 1 billion iPhones in 10 years but a new breakthrough is expected to generate more than 27 billion devices in just 3 years, creating a $1.7 trillion market.

Zacks has just released a Special Report that spotlights this fast-emerging phenomenon and 6 tickers for taking advantage of it. If you don't buy now, you may kick yourself in 2021.  

Click here for the 6 trades >>
 

Published in